Dealing with a rusted wheel hub bearing assembly can be challenging. Dirt, debris and rust cause corrosion, all of which make it difficult to properly remove the assembly. When faced with this problem you may be wondering how to remove a rusted wheel hub bearing assembly with the minimum of fuss and effort.
With the right tools and approach, it’s possible to remove a rusted wheel hub bearing safely and easily.
Things to Consider When Removing a Rusted Wheel Hub Bearing Assembly
Before you attempt to remove a rusted wheel hub bearing assembly there are a few important points to keep in mind.
Firstly, safety is the most important consideration. You should ensure that the vehicle is parked safely on a level surface and that the parking brake is engaged. Before attempting the removal of a rusted wheel hub bearing assembly make sure you have safety gear such as gloves and eye protection to protect yourself during the process.
You should have all of the necessary tools at hand. This might include a socket set, rubber mallet, torque wrench, and a bearing pull. You should also have replacement parts at the ready before starting the removal process.
How to remove a rusted wheel hub bearing assembly: Step-by-Step Guide
The following steps will help you remove a rusted wheel hub bearing assembly:
- Loosen Lug Nuts
Loosen the lug nuts on the wheel where the hub assembly is to be removed. This is easier to do while the vehicle is still on the ground.
- Lift The Vehicle
The vehicle should be lifted using a jack and secured on jack stands to ensure safety and stability.
- Remove The Wheel
Once the vehicle is lifted and secured, the lug nuts can be removed and the wheel taken off.
- Disconnect ABS Sensor
You may need to disconnect the ABS sensor from the hub assembly.
- Remove Hub Assembly Bolts
Find the bolts that secure the hub assembly to the steering knuckle or spindles. Use the correct socket and breaker bar to remove the bolts.
- Apply Penetrating Oil
Spray penetrating oil around the hub assembly and allow it to soak for a few minutes. This should help to loosen any corrosion or rust.
- Remove The Hub Assembly
Using a rubber mallet carefully tap the hub assembly. This should release it from the steering knuckle or spindle. If necessary, use a bearing puller to carefully separate the assembly from the vehicle.
- Clean The Area
Once you have carefully removed the hub assembly, you should then clean the steering knuckle or spindle. Thoroughly remove any rust, old grease or debris.
Where to Buy Replacement Parts for a Rusted Wheel Hub Bearing Assembly
So now you know how to remove a rusted wheel hub bearing assembly but where do you go to find high-quality, reliable parts?
At CV Hubs & Bearings, we make it simple to source replacement wheel hub parts that guarantee optimal performance and safety. With simple online ordering and rapid delivery, you can have the parts you need in no time at all.
If you have any questions or would like to know more about our services, call +44 (0) 161 370 3344 or contact us online.
Back to news
